Published : 03/18/2016 18:54:04
Categories : Tips
Hi, I just received a new Fine Cut-Off Circular Saw Blade, so I am gonna take this opportunity to try to explain, as some of you have requested, the pros and cons of the three blades I got now.
This is the one I am using right now. Is the bigger diameter I can mount in my circular saw. And as you can see, being that big and thin, it can tilt a bit.
Other common problem people usually have with inverted circular saws, is keeping the squareness of the blade with the table, specially at low cutting heights because the clamping system becomes more unstable the lower the blade is, and it produces tilt due to the weight of the motor. This problem will increase as the quality of the machine decreases. With mine this issue is almost imperceptible.
I am going to make a cross cut so you can see the tilt I was talking about. It is not easy to see throug the camera but it actually exists.
And I am gonna try the new one. Of course never forget to unplug the electrical cord from the wall outlet first. As you can see the quick access cover makes the replacement of the blade a lot easier.
The start is much smoother because of its lower weight and diameter and there is no tilt at all. Besides, being smaller, I can keep the circular saw in higher positions avoiding the squareness problems I was saying before.
As this kind of circular saws do not have speed control, it is important to choose the right blade for every type of work. As a rule, the harder the material is, the less revolutions you got to use. So in our case we will use blades with a lower number of teeth.
This is the new blade, it has a diameter of 190mm and 24 teeth. I'll use it mainly for wood and wood-based materials. I get a maximum cutting height of 52mm. It is just 1,8mm thin so it wastes little material and as the friction is lower you need less power, so it is perfect for rip and cross cuts at high speeds.
This one is like the other but with a bigger diameter of two hundred and thirty five millimeters with thirty six teeth. I get a max height of seventy millimeters so I'll use this one with the higher pieces of wood and wood-based materials.
The last one has a diameter of two hundred and eight millimeters, a thickness of two point sixty five millimeters and sixty four teeth. I am gonna use it for laminated boards and melamines. Because as you may know, with this dedicated materials you need to use blades with a higher number of teeth.