Table Saw Folding Outfeed Table & CrossCut Sled
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
How I made the adjustable zero clearance of my new table saw sled. First I've used the router table to make the rebate required. After that I've made the holes for the threaded inserts. Then I've set up the router table to make the final cuts to use these zero clearance inserts. I've used the miter gauge and a stop so that all the rebates are the same. Link to the full video in my bio!
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
These are the two plywood sliders I made so that I can use my new table saw sled. I've designed them to be detachable so I can use the sled as part of the outfeed table. In order to set them up more quickly and accurately, I've used some pieces of a steel pipe and some round neodymium magnets of the same diameter as the pipe. I don't think the magnet is indispensable in order to use this system.
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
Interesting modification designed by Michael in which he has attached the outfeed table to the folding base. Perfect for use with saws where it is not possible to attach the outfeed table: