3D Router Bearing Upgrade
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router Bearing Upgrade
After one year of use, it's time to perform maintenance on my 3D Router. I'm going to focus on the bearings and the aluminium profiles. As I said back in the day, aluminium wasn't the wisest choice. Some grooves have appeared because the bearings are made of a harder material.
More info in blog:
More info in blog:
-
- Posts: 1
- Joined: Sun Oct 09, 2016 5:18 pm
3D Router Bearing Upgrade
Hi.. thanks for sharing your work and knowledge.
I'm thinking to buy the 3D router project plans which is very useful tool.
Can you please advise if plans contain also the last update with the new bearings?
I'm thinking to buy the 3D router project plans which is very useful tool.
Can you please advise if plans contain also the last update with the new bearings?
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router Bearing Upgrade
Hi Phil,
I'm not planning to update the plans of the 3D Router because as you can see in the video, hardly any modifications are necessary and both systems are good if made correctly and with the right parts. You only need to separate the bearings 6mm on axis Y and X, and lower the Z axis part another 6mm as seen in the video.
sorry for the inconveniences.
I'm not planning to update the plans of the 3D Router because as you can see in the video, hardly any modifications are necessary and both systems are good if made correctly and with the right parts. You only need to separate the bearings 6mm on axis Y and X, and lower the Z axis part another 6mm as seen in the video.
sorry for the inconveniences.
-
- Posts: 4
- Joined: Wed Nov 02, 2016 12:30 pm
3D Router Bearing Upgrade
Hej from Sweden. Please can you tell me how many of the RM2 bearings are needed for the Upgrade.
Greetings. Gyspy
Greetings. Gyspy
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router Bearing Upgrade
hi Roger,
you will need 16 bearings!
you will need 16 bearings!
-
- Posts: 1
- Joined: Sat Jul 02, 2016 6:12 am
3D Router Bearing Upgrade
hello from Russia, than sorry for my english.
I find very cheap V Groove bearings in aliexpress , 22$ for 20 pieces. But i newbie, what do you think about this bearings ? Can i use it for this project ?
Do I understand correctly that the main thing is the inner diameter?
I find very cheap V Groove bearings in aliexpress , 22$ for 20 pieces. But i newbie, what do you think about this bearings ? Can i use it for this project ?
Do I understand correctly that the main thing is the inner diameter?
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router Bearing Upgrade
hi Konstantin!
I do not recommend you to use these bearings, they have very little channel depth.
Better go with the RM2-2RS 3/8 V
"inner diameter" is the diameter of the hole...
let me know if you still have problems.
I do not recommend you to use these bearings, they have very little channel depth.
Better go with the RM2-2RS 3/8 V
"inner diameter" is the diameter of the hole...
let me know if you still have problems.
-
- Posts: 8
- Joined: Wed Aug 30, 2017 7:30 pm
3D Router Bearing Upgrade
Hola de nuevo
En la segunda foto aparecen 3 arandelas
¿Podrias indicar de cada una de ellas sus dimensiones, diametro interior/exterior/grosor?
Gracias
En la segunda foto aparecen 3 arandelas
¿Podrias indicar de cada una de ellas sus dimensiones, diametro interior/exterior/grosor?
Gracias
-
- Posts: 2248
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router Bearing Upgrade
hola Javi,
son arandelas M10 estándar de las que encontrarás en cualquier ferretería en españa.
Grande - 30mm de diámetro x 2.5mm de grosor
Pequeña - 20 de diámetro x 2mm de grosor
son arandelas M10 estándar de las que encontrarás en cualquier ferretería en españa.
Grande - 30mm de diámetro x 2.5mm de grosor
Pequeña - 20 de diámetro x 2mm de grosor
-
- Posts: 8
- Joined: Wed Aug 30, 2017 7:30 pm
3D Router Bearing Upgrade
El motivo de mi pregunta era que he podido ver diferentes fotos de estos rodamientos y veo que difieren, de ahi la pregunta de la dimension de las arandelas.
Como se puede ver, en el rodamiento de la izquierda la "parte color negro" es menor, y es posible que una arandela de 20 mm de diametro montara sobre la parte de acero. El de la derecha es el que aparece en tu video.
Esa foto es de esta tienda online
¿Qué opinas sobre este posible problema?
Como se puede ver, en el rodamiento de la izquierda la "parte color negro" es menor, y es posible que una arandela de 20 mm de diametro montara sobre la parte de acero. El de la derecha es el que aparece en tu video.
Esa foto es de esta tienda online
¿Qué opinas sobre este posible problema?