3D Router, when a CNC machine is overkill.
-
- Posts: 1
- Joined: Sat Aug 15, 2015 8:44 pm
3D Router, when a CNC machine is overkill.
Amazing setup ... this is the most interesting router setup i've ever seen.
Makes me want to build one myself
Love your guitarwork also
Keep up the good work
Makes me want to build one myself
Love your guitarwork also
Keep up the good work
-
- Posts: 2247
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router, when a CNC machine is overkill.
wrote:Amazing setup ... this is the most interesting router setup i've ever seen.
Makes me want to build one myself
Love your guitarwork also
Keep up the good work
thank you Desain.
-
- Posts: 2247
- Joined: Thu Oct 22, 2015 4:51 pm
-
- Posts: 2247
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router, when a CNC machine is overkill.
Gracias Oscar, bricogeek rules!
http://blog.bricogeek.com/noticias/diy/un-router-3d-casero-muy-versatil-y-sin-ordenador/
http://blog.bricogeek.com/noticias/diy/un-router-3d-casero-muy-versatil-y-sin-ordenador/
-
- Posts: 5
- Joined: Fri Sep 04, 2015 9:26 pm
3D Router, when a CNC machine is overkill.
I love this 3D router table!
Can I make this project with metric drill bits and Imperial router bits? It looks like the grooves you cut with the router can accept a little wiggle.
Thanks!
Can I make this project with metric drill bits and Imperial router bits? It looks like the grooves you cut with the router can accept a little wiggle.
Thanks!
-
- Posts: 2247
- Joined: Thu Oct 22, 2015 4:51 pm
3D Router, when a CNC machine is overkill.
Hello Pete, you have no problem to use imperial router bits ... for these grooves do not need super precision.
-
- Posts: 1
- Joined: Fri Oct 23, 2015 3:22 pm
3D Router, when a CNC machine is overkill.
Hi
Thinking of buying the plans, but before, could you let us know
The additional parts list
The amount of plywood, thickness, needed
Thanks
Thinking of buying the plans, but before, could you let us know
The additional parts list
The amount of plywood, thickness, needed
Thanks
-
- Posts: 5
- Joined: Fri Sep 04, 2015 9:26 pm
3D Router, when a CNC machine is overkill.
I used two 5 foot by 5 foot sheets of 18mm baltic birch plywood, plus some 6mm and 12mm scraps