20 mm plywood hard to come by
-
- Posts: 3
- Joined: Thu Jun 01, 2017 8:21 pm
20 mm plywood hard to come by
Hi, I love your designs and the very clear way of thinking behind them. I downloaded the plans for the Router & Saw table, but there is one problem with them. Here in Europe Plywood-thicknesses jump from 18 mm to 22. 20 mm is nowhere to be found. Just making the tabletop a bit thinner (18 mm is the thickest melamine I found) is not a problem, but there are quite a lot of sizes that have to change with that. Is it possible/hard for you to adapt the design to 18 mm?
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
20 mm plywood hard to come by
hi Niek,
you're right, depending on the country where you live it is easier to get certain plywood boards...
You can use the one of 18mm thickness perfectly, you will only have to modify a little some pieces.
For example the depths of the recesses for the circular saw, jig saw etc...you will need to discount that thickness difference.
Also some parts of the fence system.
.
you're right, depending on the country where you live it is easier to get certain plywood boards...
You can use the one of 18mm thickness perfectly, you will only have to modify a little some pieces.
For example the depths of the recesses for the circular saw, jig saw etc...you will need to discount that thickness difference.
Also some parts of the fence system.
.
-
- Posts: 3
- Joined: Thu Jun 01, 2017 8:21 pm
20 mm plywood hard to come by
Thanks, Suso, I'll try to alter the plans. If you want, I can send the altered version back to you?
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
20 mm plywood hard to come by
that would be great! thanks
-
- Posts: 3
- Joined: Thu Jun 01, 2017 8:21 pm
20 mm plywood hard to come by
I sent them to your info-mailadress.
-
- Posts: 3
- Joined: Fri Mar 03, 2017 8:08 pm
20 mm plywood hard to come by
Hola desde Bruxelles,yo ya compre los tableros pero tengo un ploblema con los de 18 mm y es que de largo estan bien pero de ancho no porque tiene 1220 mm,osea que le faltan 3cm,la pregunta es la siguiente,hay otra manera de replantear los cortes, o me tocara comprar otro tablero?
Otra cuestion donde los nombres de los ficheros bienen en ingles y me pregunto si bienen en Espanol al igual que l a lista del material biene en Espanol?,MERCI
Otra cuestion donde los nombres de los ficheros bienen en ingles y me pregunto si bienen en Espanol al igual que l a lista del material biene en Espanol?,MERCI
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
20 mm plywood hard to come by
hola Luis,
que raro, normalmente en Europa todos los tableros contrachapados son de 2500x1250mm. Si ya los has comprado será mejor que replantees los cortes. En Maxcut es fácil hacerlo, debes instalar y abrir el programa, luego abrir el archivo que incluyen los planos, añadir el tamaño de tu tablero y re-optimizar.
Los nombres de algunos materiales están solo en inglés, pero en la carpeta "cutting list" verás un fichero llamado "cheat sheet" donde puedes ver fotos de todos los herrajes, puedes imprimirlo para preguntar por ellos en una ferretería.
Hazme saber si tienes problemas con el Maxcut, recuerda que aquí tienes un manual.
que raro, normalmente en Europa todos los tableros contrachapados son de 2500x1250mm. Si ya los has comprado será mejor que replantees los cortes. En Maxcut es fácil hacerlo, debes instalar y abrir el programa, luego abrir el archivo que incluyen los planos, añadir el tamaño de tu tablero y re-optimizar.
Los nombres de algunos materiales están solo en inglés, pero en la carpeta "cutting list" verás un fichero llamado "cheat sheet" donde puedes ver fotos de todos los herrajes, puedes imprimirlo para preguntar por ellos en una ferretería.
Hazme saber si tienes problemas con el Maxcut, recuerda que aquí tienes un manual.