Mobile Workbench with Table Saw & Router Table
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Just posted on youtube the second video in a five-part series where I'll show you how to build the sliding carriage of my new mobile workbench with bench table saw.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Short video where I'll show you the features and functions of the sliding carriage for my new homemade mobile workbench with table saw. Full video on my youtube channel!
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
It's time to make the router table to get even more out of my new mobile workbench. I will also make the insert for the router and the fence guide!
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Making the recess for the router insert plate. I've used the insert itself to fine-tune the adjustable router template guide and I finished the process with the router and a flush trim bit.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Just posted on youtube the third video in a five-part series where I'll show you how to build the router table of my new mobile workbench.
-
- Posts: 1
- Joined: Fri Sep 24, 2021 10:07 am
Re: Mobile Workbench with Table Saw & Router Table
Hello Suso,
Again a great design from you of course.
But...this handle...
If you provide me the size of the Allen bit and the lever you prefer I can provide you a decent one
I 3d print and design a bit, and it will a honor to rise this handle to the Paoson level!!
Thanks for your work and sharing!
Benoit
Again a great design from you of course.
But...this handle...
If you provide me the size of the Allen bit and the lever you prefer I can provide you a decent one
I 3d print and design a bit, and it will a honor to rise this handle to the Paoson level!!
Thanks for your work and sharing!
Benoit
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Here a short video to show you how I made the insert plate for my new mobile workbench-router table. Full video on Youtube:
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Making the insert rings for the router table. I've used a jig with an axis and the sanding disc to get a perfect circle:
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
Short video to show you how I made the router table fence's tightening knobs. I've made them with pieces of a hard plyboard to take advantage of the full length of the screws. The knobs will be placed higher than the fence, which I think will make them more comfortable to use.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Mobile Workbench with Table Saw & Router Table
I've edited this short video to show off some of the functions of my new router table. I am quite happy with the final result!