Table Saw Folding Outfeed Table & CrossCut Sled
-
Suso
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
How I made the adjustable zero clearance of my new table saw sled. First I've used the router table to make the rebate required. After that I've made the holes for the threaded inserts. Then I've set up the router table to make the final cuts to use these zero clearance inserts. I've used the miter gauge and a stop so that all the rebates are the same. Link to the full video in my bio!
-
Suso
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
These are the two plywood sliders I made so that I can use my new table saw sled. I've designed them to be detachable so I can use the sled as part of the outfeed table. In order to set them up more quickly and accurately, I've used some pieces of a steel pipe and some round neodymium magnets of the same diameter as the pipe. I don't think the magnet is indispensable in order to use this system.
-
Suso
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
Interesting modification designed by Michael in which he has attached the outfeed table to the folding base. Perfect for use with saws where it is not possible to attach the outfeed table:
-
df.dmy
- Posts: 1
- Joined: Thu Jun 06, 2024 2:22 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
Hey Suso & community.
First of all I want to say I am quite impressed with your projects. I ended up here because I was researching buying a table saw.
I am looking forward to building your foldable table design, both to have it as a tool and to train myself into the technicalities of building it.
One thing I am having trouble finding, and I understand it is probably a difficult question to answer, but do you have any indication written anywhere of what the rough price of all the materials for a project might be? Momentarily this is the one thing holding me back, as I am unsure how much money I will have to invest, and whether I am able to afford this.
Thank you very much,
Daniel.
First of all I want to say I am quite impressed with your projects. I ended up here because I was researching buying a table saw.
I am looking forward to building your foldable table design, both to have it as a tool and to train myself into the technicalities of building it.
One thing I am having trouble finding, and I understand it is probably a difficult question to answer, but do you have any indication written anywhere of what the rough price of all the materials for a project might be? Momentarily this is the one thing holding me back, as I am unsure how much money I will have to invest, and whether I am able to afford this.
Thank you very much,
Daniel.
-
Suso
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Table Saw Folding Outfeed Table & CrossCut Sled
hi Daniel,
it is a difficult question, it depends on the country of residence and the materials you are going to use. Using inexpensive plywood such as poplar or pine plywood, could cost around $400. This cost does not include the clamping system.
it is a difficult question, it depends on the country of residence and the materials you are going to use. Using inexpensive plywood such as poplar or pine plywood, could cost around $400. This cost does not include the clamping system.