Diy Blast Gate Box for the Workbench
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Diy Blast Gate Box for the Workbench
This is the blast gate box that I'll be using with my new mobile workbench. The box has a main 100mm dust hose and two secondary 63mm hoses connected to a blast gate, one for the table saw and another that goes straight to the router table cabinet:
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Diy Blast Gate Box for the Workbench
I've almost finished the blast gate box. I still need to screw the gates and place the box in the workbench.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Diy Blast Gate Box for the Workbench
Just posted on Youtube the fourth video in a five-part series where I'll show you how to build the blast gate box that I'll be using with my new mobile workbench.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Diy Blast Gate Box for the Workbench
Short video to show you the homemade blast gate box for my new mobile workbenh. I’m going to run a few tests to see how well it works.