Band Saw Stand with drawers and wheels. I've designed a foldable handle in order to move it round the workshop more easily. Of course, this stand can support other tools, such as a small jointer or any other machine as long as it's not too tall.
I've used birch plywood, although a lighter kind of plywood such as okumen or pine could work as well, or even MDF. The drawers will slide along a groove machined on the side of the stand, saving me the trouble of installing slides.
In its lower part I have left a hole under the drawers to place the sled of the bandsaw. Blog Article:
Blog Article:
Band Saw Stand
-
- Posts: 7
- Joined: Fri Nov 11, 2016 4:21 pm
Band Saw Stand
excelente Suso, excelente, este video me da mucha alegria porque hacia tiempo no teniamos noticias tuyas, y en buena hora mi amigo, estas de regreso y para mi, con mas motivacion a seguirte, por la sierra de cinta, hace mucho que la espero, jajajajaja.
bueno te mando un abrazo desde argentina, y siempre con esa calidad y categoria en tus trabajos da mucho gusto seguirte a aprender de tus trabajos.
buen comienzo de año para ti y para toda tu familia.
un Abrazo.
bueno te mando un abrazo desde argentina, y siempre con esa calidad y categoria en tus trabajos da mucho gusto seguirte a aprender de tus trabajos.
buen comienzo de año para ti y para toda tu familia.
un Abrazo.
-
- Posts: 2250
- Joined: Thu Oct 22, 2015 4:51 pm
Band Saw Stand
muchas gracias por tus amables palabras Sergio! También te deseo un buen comienzo de año. Espero que te gusten mis próximos proyectos!
-
- Posts: 13
- Joined: Sat Mar 10, 2018 12:17 am
Re: Band Saw Stand
I had to modify the drawers. The 9mm plywood warped really bad after I had cut it all to size. So I ended up making the face out of 3/4" plywood and used the 9mm for the sides and back.
-
- Posts: 1
- Joined: Fri Dec 14, 2018 8:35 am
Re: Band Saw Stand
I have left a hole under the drawers to place the sled of the bandsaw.
-
- Posts: 6
- Joined: Fri Jul 16, 2021 12:56 pm
Re: Band Saw Stand
Very nice work! Perfect!